Hi All

I am working through the HowTo:

I got to here :

venus-setup <comma_separated_host_list> <cache_size_in_kb>

venus-setup and venus (below) are in /usr/sbin. Make sure that /usr/sbin 
is in your path or that you use fully qualified pathnames. We strongly 
recommend that you initially try testserver.coda.cs.cmu.edu as the 
comma_separated_host_list first, and keep the cache size to 20000.

NOTE: venus-setup will edit /etc/services to make sure some additional 
services are registered.

The following assumes you are running X-Windows. However, you could run 
these commands from virtual consoles as well, by omitting the xterm -e 
in front of the commands below.

Start Venus with:

venus &

so i did :

[root_at_lxcontrol001 /]# venus-setup testserver.coda.cs.cmu.edu  20480
/etc/services already has new services registered! Good.
/etc/services ready for Coda
[root_at_lxcontrol001 /]# venus

Date: Thu 09/19/2002

16:45:38 /usr/coda/LOG size is 560717 bytes
16:45:38 /usr/coda/DATA size is 2242868 bytes
16:45:38 Initializing RVM data...
16:45:38 Fatal Signal (11); pid 15078 becoming a zombie...
16:45:38 You may use gdb to attach to 15078


I have been looking around , using the list , google and a few other 
things to no avail .

I am using the following software versions  :

rwxr-xr-x    1 root     root      1342652 Sep 19 12:03 coda-5.3.19.tar.gz
-rwxr-xr-x    1 root     root        31332 Sep 19 15:15 lwp-1.8-1.i386.rpm
-rwxr-xr-x    1 root     root        37349 Sep 19 15:15 
lwp-devel-1.8-1.i386.rpm
-rwxr-xr-x    1 root     root       286017 Sep 19 15:15 rpc2-1.13-1.i386.rpm
-rwxr-xr-x    1 root     root       508442 Sep 19 15:25 
rpc2-devel-1.13-1.i386.rpm
-rwxr-xr-x    1 root     root       291899 Sep 19 15:15 rvm-1.6-1.i386.rpm
-rwxr-xr-x    1 root     root       452362 Sep 19 15:24 
rvm-devel-1.6-1.i386.rpm
-rwxr-xr-x    1 root     root        69349 Sep 19 15:15 
rvm-tools-1.6-1.i386.rpm

Can any one tell me what I have missed ?

Neil