OUT MSG 1095262182 1095262182 yo! IN NOTE 1095262187 1095262187 The user has added you to his/her contact list IN MSG 1095262482 1095262482 hello OUT MSG 1095262492 1095262492 ready? IN MSG 1095262514 1095262514 sure, thanks for helping OUT MSG 1095262546 1095262546 np..so u got coda 6.0.6 right? IN MSG 1095262562 1095262562 yeah, I'm using coda 6.0.6 OUT MSG 1095262573 1095262573 compiled or binary dist? IN MSG 1095262583 1095262583 compiled. OUT MSG 1095262606 1095262606 fine..so please delete vice and vicepa directory from ur root IN MSG 1095262652 1095262652 whole dir, or just files inside ? OUT MSG 1095262663 1095262663 whole dir IN MSG 1095262691 1095262691 done. OUT MSG 1095262801 1095262801 ok, please run vice-setup, I dont know if u have spec. partition for rvm log and data I use /vice/db/rvm.log and /vice.db/rvm.data , no partitions, just files. I got only 1 server and 2 clients. Also please specify 8 characters tokens as asked, elephant does fine :) IN MSG 1095262839 1095262839 ok, one moment. I have also been using files instead of partitions. IN MSG 1095262995 1095262995 ok, that's done. OUT MSG 1095263066 1095263066 please run auth2 server and check its log, than run vice server, updateclnt and updatesrv and rpc2portmap. For all of those use init scripts IN MSG 1095263288 1095263288 ok, that dones, except, I seem to be getting errors in AuthLog IN MSG 1095263293 1095263293 Starting Auth Server...... [11:47:34]Main Process: "rpc2b.c", line 123: RPC2_Init(): Couldn't create socket Date: Wed 09/15/2004 11:47:34 RPC2_Init failed with RPC2_FAIL (F) OUT MSG 1095263338 1095263338 I had the same problem. Is rpc2portmap running? IN MSG 1095263371 1095263371 yup, it is OUT MSG 1095263384 1095263384 How about vice server? What says the log? IN MSG 1095263427 1095263427 SrvLog correct ? OUT MSG 1095263455 1095263455 SrvLog and SrvErr IN MSG 1095263477 1095263477 SrvLog looks fine, no errors. and SrvErr is empty OUT MSG 1095263636 1095263636 if u restart auth2 what happens? IN MSG 1095263720 1095263720 same thing, tried several times. This is interesting, I don't recall having this problem during a previous install. OUT MSG 1095263767 1095263767 in /etc/services the ports are as manual says? OUT MSG 1095263777 1095263777 for all coda stuff? IN MSG 1095263836 1095263836 I believe so. 173:rpc2portmap 369/udp # Coda portmapper 174:codaauth2 370/tcp 175:codaauth2 370/udp # Coda authentication server 367:venus 2430/tcp # codacon port 371:codasrv 2432/tcp # not used 372:codasrv 2432/udp # server port IN MSG 1095263837 1095263837 373:codasrv-se 2433/tcp # tcp side effects 374:codasrv-se 2433/udp # udp sftp side effectQ please hold one second, I will attempt to restart all the coda services, and see if that makes any difference. IN MSG 1095263994 1095263994 ok. All services are up and running now. including auth2 OUT MSG 1095264020 1095264020 great now at SCM: run pdbtool IN MSG 1095264040 1095264040 ok. running... OUT MSG 1095264063 1095264063 type: nui whatever 601 IN MSG 1095264083 1095264083 does it have to be an existing user account on the system ? OUT MSG 1095264087 1095264087 no IN MSG 1095264108 1095264108 ok, nui testing 601 OUT MSG 1095264116 1095264116 ok type exit IN MSG 1095264145 1095264145 k. OUT MSG 1095264187 1095264187 Check the updateclnt log and see if line: Updated db/prot_users.cdb is presented IN MSG 1095264232 1095264232 yup, it exists. OUT MSG 1095264257 1095264257 cool, please go to the client and cpasswd the coda admins password IN MSG 1095264289 1095264289 can I do this from the SCM ? or must it be a client ? OUT MSG 1095264298 1095264298 from the client IN MSG 1095264309 1095264309 one moment please ... IN MSG 1095264417 1095264417 cool, it worked, "Password changed, it will be in effect in about 1 hour". Don't understand, I don't think I did anything different this time. Very Interesting... :-) OUT MSG 1095264463 1095264463 :) so on the client type: au nu IN MSG 1095264575 1095264575 RPC2_Bind() --> RPC2_NOTAUTHENTICATED (F) OUT MSG 1095264626 1095264626 after au nu u should log as coda admin and than set the user info IN MSG 1095264776 1095264776 Authentication failed for "coda" from 10.255.255.254:1036 OUT MSG 1095264864 1095264864 yes that's the auth log. This appears when u type ur coda admin credentials to the firs au questions? IN MSG 1095265214 1095265214 I'm sorry, I'm a little confused. I ran au nu, as user "coda", and got that error after I enter a password. coda is the user that I setup as the coda admin. IN MSG 1095265214 1095265214 I am uncertain of how to proceed. OUT MSG 1095265263 1095265263 but u r able to change coda's password right? IN MSG 1095265298 1095265298 yep. IN MSG 1095265341 1095265341 just changed it again to make sure. OUT MSG 1095265368 1095265368 if u return it back to changeme and than use coda and changeme for au and than fill the info for the user added via pdbtool what happens? IN MSG 1095265463 1095265463 change the password back to "changeme", then what do you want me to do ? OUT MSG 1095265491 1095265491 ok...run au nu and tell me what it wants IN MSG 1095265505 1095265505 Vice name OUT MSG 1095265510 1095265510 type coda OUT MSG 1095265514 1095265514 than? IN MSG 1095265522 1095265522 password = changeme ? OUT MSG 1095265525 1095265525 right IN MSG 1095265548 1095265548 RPC2_BIND() --> RPC2_SUCESS Vice User: OUT MSG 1095265555 1095265555 testing IN MSG 1095265581 1095265581 New Password: testing New Info: ? OUT MSG 1095265592 1095265592 whatever u want IN MSG 1095265622 1095265622 AuthNewUser() --> RPC2_DEAD (F) OUT MSG 1095265650 1095265650 ok, please go back to scm and run pdbtool IN MSG 1095265675 1095265675 k OUT MSG 1095265685 1095265685 run list and see if usr testing is there IN MSG 1095265722 1095265722 yes it is. OUT MSG 1095265755 1095265755 ok now add it into the group System:AnyUser: ag -2 testing's uid IN MSG 1095265793 1095265793 ok, that's done. OUT MSG 1095265818 1095265818 please list it again and check if testing is in System:AnyUser IN MSG 1095265833 1095265833 it is :-) OUT MSG 1095265850 1095265850 :) go back to client and repeat the steps with au IN MSG 1095266042 1095266042 au nu: Your Vice name: coda Your Password: changeme RPC2_Bind() --> RPC2_SUCESS Vice User: bruno New password: testing New info: whatever AuthNameToId() --> AUTH_FAILED OUT MSG 1095266115 1095266115 is bruno added via pdbtool at scm? if he is is he in System:AnyUser? IN MSG 1095266139 1095266139 ah, I see I must do that first ? OUT MSG 1095266152 1095266152 right IN MSG 1095266321 1095266321 ok, that worked. OUT MSG 1095266363 1095266363 ok so u got ur user set up now u have to create volume at scm and mount it as coda from the client IN MSG 1095266385 1095266385 ok, how do I do that ? IN MSG 1095266395 1095266395 createvol something something me thinks. OUT MSG 1095266444 1095266444 createvol_rep brunp E0000100 /vicepa OUT MSG 1095266450 1095266450 bruno IN MSG 1095266462 1095266462 what is E0000100 ? OUT MSG 1095266507 1095266507 vice id of the scm i think IN MSG 1095266569 1095266569 Getting initial version of /export/vice/vol/BigVolumeList. V_BindToServer: binding to host pa-wb-001.public GetVolumeList finished successfully V_BindToServer: binding to host pa-wb-001.public Servers are (pa-wb-001 ) V_BindToServer: binding to host pa-wb-001.public GetVolumeList finished successfully Partition /vicepa not found on server pa-wb-001. /vice is a symbolic link to /export/vice IN MSG 1095266570 1095266570 /visepa is a symbolic link to /export/vicepa would this cause a problem ? OUT MSG 1095266656 1095266656 visepa??? u should set /vicepa as the volume holder at scm config IN MSG 1095266722 1095266722 /vicepa is a symbolic link to /export/vicepa OUT MSG 1095266759 1095266759 there is: /visepa not vicepa, but u can use visepa if u set it at scm config IN MSG 1095266922 1095266922 createvol_rep bruno E0000100 /vicepa V_BindToServer: binding to host pa-wb-001.public Servers are (pa-wb-001 ) V_BindToServer: binding to host pa-wb-001.public GetVolumeList finished successfully Partition /vicepa not found on server pa-wb-001. I am not trying to use /visepa. OUT MSG 1095266995 1095266995 what folder did u chose while doing vice-setup? IN MSG 1095267006 1095267006 /vicepa IN MSG 1095267040 1095267040 want me to re-run the setup ? If I do that, will I lose the user stuff I just did ? OUT MSG 1095267058 1095267058 so createvol should find it? Does /vicepa exists? OUT MSG 1095267080 1095267080 do not rerun the setup OUT MSG 1095267110 1095267110 check /etc/server.conf or /usr/local/coda/server.conf for this "partition" IN MSG 1095267249 1095267249 don't see anything in server.conf about /vicepa IN MSG 1095267302 1095267302 I just restarted the codaserver and did this: createvol_rep bruno E0000100 /vicepa V_BindToServer: binding to host pa-wb-001.public RPC2_NewBinding to server pa-wb-001.public failed with RPC2_NOBINDING (F) Failed to dump the current VRDB into /vice/db/VRList.new OUT MSG 1095267359 1095267359 what says /vice/db/vicetab? IN MSG 1095267393 1095267393 pa-wb-001 /export/vicepa ftree width=256,depth=3 OUT MSG 1095267397 1095267397 u must be at scm while crating volumes OUT MSG 1095267417 1095267417 so dont use /vicepa but /export/vicepa IN MSG 1095267549 1095267549 ok, done. OUT MSG 1095267590 1095267590 no go to client, log as coda and do cfs mkm /coda/ur_host_name/dir bruno IN MSG 1095267664 1095267664 cfs mkm /coda/pa-wb-001/dir bruno /coda/pa-wb-001: No such file or directory OUT MSG 1095267720 1095267720 try bruno instead of dir :) IN MSG 1095267742 1095267742 tried that too. IN MSG 1095267748 1095267748 trying again... IN MSG 1095267763 1095267763 same thing... OUT MSG 1095267769 1095267769 run venus at client..sorry forgot to tell you IN MSG 1095267825 1095267825 same thing OUT MSG 1095267852 1095267852 venus -init & than clog as coda mount it IN MSG 1095267917 1095267917 how do I mount it ? OUT MSG 1095267924 1095267924 cfs mkm OUT MSG 1095267953 1095267953 by mounting it i mean cfs mkm /coda/pa-wb-001/dir bruno IN MSG 1095268048 1095268048 /coda/pa-wb-001: No such file or directory which is wierd because ls'ing the dir = pa-wb-001.public -> #@pa-wb-001.public OUT MSG 1095268108 1095268108 this should be ur hostname ie 192.xx.xx.xx. 10.... IN MSG 1095268253 1095268253 still not working. IN MSG 1095268263 1095268263 pa-wb-001.public should be an IP ? OUT MSG 1095268315 1095268315 The path while mounting is /coda/hostname and not /coda/any_directory IN MSG 1095268403 1095268403 cfs mkm /coda/pa-wb-001.public/dir bruno all I see inside code is: pa-wb-001.public -> #@pa-wb-001.public but I still get No such file or directory. OUT MSG 1095268470 1095268470 pa-wb-001.public is the hostname of ur client? IN MSG 1095268540 1095268540 no, pa-wb-001.public is the hostname of the scm OUT MSG 1095268665 1095268665 ok that's correct...and u r cloged as coda admin at the host right? IN MSG 1095268706 1095268706 on the server or the client ? OUT MSG 1095268735 1095268735 on the client u must perform mounting only on the client IN MSG 1095268807 1095268807 no dice. Same thing. IN MSG 1095268820 1095268820 would this go to one of the coda log files ? OUT MSG 1095268919 1095268919 well u r at the client logged as coda admin, so it can go to auth log on the scm or venus.log or venus err on the client IN MSG 1095269034 1095269034 SrvLog on SCM: 13:23:20 VLDB_Lookup: no more records in VLDB OUT MSG 1095269206 1095269206 actually we did not created coda root :) createvol_rep "name for ur coda root" E0000100 /vicepa IN MSG 1095269301 1095269301 /coda/pa-wb-001.public: Resource temporarily unavailable Yes, new errors = progress :-) IN MSG 1095269385 1095269385 trying again... IN MSG 1095269402 1095269402 nope... OUT MSG 1095269466 1095269466 create root volume, create another volume for user and than mount users volume IN MSG 1095269608 1095269608 createvol_rep CodaRoot E0000100 /export/vicepa then createvol_rep bruno E0000100 /export/vicepa <-- already exists. Still get same error when trying to mount. Do I have to mount the CodaRoot volume first somewhere OUT MSG 1095269902 1095269902 no u dont mount codaroot, restart venus clog, and try again IN MSG 1095270003 1095270003 no dice, same thing. OUT MSG 1095270084 1095270084 how about restarting the server and the client :) ? IN MSG 1095270116 1095270116 rebooting the machines ? or just the services ? OUT MSG 1095270122 1095270122 services IN MSG 1095270136 1095270136 ok, one moment IN MSG 1095270307 1095270307 nope, restarted all services. /coda/pa-wb-001.public: Resource temporarily unavailable IN MSG 1095270361 1095270361 odd: /coda/pa-wb-001.public/ looks like a directory now, but I can't ls it, I get the same error. OUT MSG 1095270408 1095270408 Actually I dont know now ... sorry there is an manual at coda site not that one on the web, but at their ftp, which pretty much coresponds to coda 6.0.6 IN MSG 1095270424 1095270424 one sec, I think I found the problem. OUT MSG 1095270429 1095270429 ok IN MSG 1095270508 1095270508 dang OUT MSG 1095270525 1095270525 so? IN MSG 1095270532 1095270532 had /coda dir mounted several times. Thought if I unmount them all and restart venus it would fix it IN MSG 1095270540 1095270540 didn't work. IN MSG 1095270572 1095270572 Well, bottom line is, if I can get this thing to mount correctly, I can do that on as many clients as I wish ? OUT MSG 1095270575 1095270575 venus mounts coda automatically u should not mount /coda before venus OUT MSG 1095270596 1095270596 yes IN MSG 1095270597 1095270597 right, but I had several instances of venus running for some reason. OUT MSG 1095270607 1095270607 run just 1 IN MSG 1095270614 1095270614 is there any other configuration that is required ? OUT MSG 1095270633 1095270633 no than u add ACLs to users and u r all set IN MSG 1095270649 1095270649 ok, great. Thanks SO much :-) IN MSG 1095270658 1095270658 was racking my brain trying to figure this stuff out. OUT MSG 1095270681 1095270681 np...i installed it for 2 days :) IN MSG 1095270687 1095270687 I'm sure I can track down that resource unavailable problem. OUT MSG 1095270700 1095270700 :) IN MSG 1095270714 1095270714 2 days, ouch . Thanks again :-) OUT MSG 1095270729 1095270729 ur welcome IN MSG 1095270797 1095270797 well, I'm gonna get some food. Have a wonderful day :-) And thanks again. OUT MSG 1095270814 1095270814 u too man, cya later IN MSG 1095585489 1095585489 sorry to bother you again, but I was attempting to save the conversation we just had, when licq crashed on me. The history of the conversation is incomplete. If you have a log of the conversation, can you please email it to me if you have time ? Thanks again :-) redirectingdecoy@yahoo.com